Performances

The test bench is used for the calibration and the testing conforming to the exercise condition of the pumps regulators, advanced variations and carburetors feeding pumps. Any other use not conforming to the test bench is not allowed.

The 12PSDW-2 series test bench available in 3 version 7.5kW, 11kW and 15kW, has been realized in observance of the ISO 4008 regulations actually in force for the test and the calibration of the in line and rotative diesel fuel injection pumps.

Used for BOSCH in line pumps of size K, M, MW, A, B, BV, P(ZU,ZW,ZM) and BOSCH rotative distributor injection pumps EP/VA, EP/VM, VE,…F…, also used for Chinese pumps size I, II, III, K, P7, BQ etc.

Uses

The 12PSDW-2 allows to carry out the following checks,

·  check of the injection pump’s tightness

· capacity measure of each cylinder in different revolution, with pre-selection of the stroke number

· check of each line’s injection timing and starting point of injection

· check of the intervention of the speed regulators

· measurement of the pressure of the feed pump

· check of the pneumatic regulators of the in line and distributor injection pumps

· measurement of rotative distributor pump’s body internal pressure

· check of the solenoid valve (DC 12/24V)